How to prevent roller sticks from polluting tiles?

Steel roller bars are commonly used in kiln tail bricks, and the reason for their easy soiling is mainly due to the industrial rubber sheath covering them. After the tile comes out of the kiln, the back of the kiln is rubbed and rolled on the surface of the roller. Before the brick has reached the picking station at the end of the kiln, the pressure of the compressed air pipe and the cylinder piston will pass through the kiln. When the baffle is lifted up, the steel roller continues to rotate and is continuously rolling friction with the back of the brick, and the worn black powder in the roller is adhered to the groove on the back of the brick.

After the first piece of brick is positioned in the positioning mechanism of the packaging machine, the second piece of brick enters the positioning mechanism of the packaging machine, and the black powder in the groove on the back side impacts and adheres to the glazed surface of the first piece of brick, so that The glazed surface of the first brick was scratched, and the black powder ground from the roller was also embedded in the scratched glazed sipe, which was difficult to remove.

When the industrial rubber sheath on the roller is completely worn and the spare parts are not kept up, a few turns of the adhesive sealing tape can be wrapped around the steel roller to avoid the black powder dust on the steel roller. Fall into the groove on the back of the brick. This problem can also be solved with the backing paper between the bricks, but remember to use wet paper and colored paper, otherwise the water absorption of the brick will be more than 10%, which may cause stains on the surface of the brick.

The method of avoiding the dirtyness of the ceramic roller is usually to apply high-temperature alumina slurry on the back of the blank before entering the kiln (the brick base is marked with calcium and iron), and the dirt adhered to the roller by the grinding machine. Object. Measures such as scraping the mud and cleaning the dust at the bottom of the brick can further prevent the roller from being dirty.

Material :Natural gray quartz 

Size       :Random size 
Shape   :Irregularity 

Packing :H fumigated strong wooden crate.

The wooden crate size is made as the container size . After loading the wooden crate in the container ,the wooden crates will nearly same size with the width of the container .It can make the wooden crate not have space to move during transport . In this case ,it can keep the stone safety mostly


Castle Stone

Castle Stone,Outside Wall Panel,Irregular Stone Wall Panel,Natural Castle Stone

HEBEI DFL STONE , https://www.dflstone.com