I believe that many people have faced this problem, the Toilet leaks, and the water in the bathroom is very beautiful. The first reaction of many people is to find a property or a special maintenance technician to repair, but in fact, we can also find out the most basic reasons for leaking the toilet. It is also a troublesome thing to ask for far. The toilet tank can be divided into 3 parts: 1. Influent components: It is the part that controls the ingress and egress of water. The shape is mostly a part with a copper rod attached to a large white floating ball. 2, falling water components: is the part of the water tank to rush out, the shape is mostly a piece of rope connected to a black semi-circular float. 3, the handle assembly: that is the component to press it when flushing. When you leak water, you can check it first: 1. Whether the black semi-circular float on the falling component is covered, or the black semi-circular float off, or the rope is stuck. 2, or a black semi-circular float deformation. (When you touch the black semi-circular float by hand, it will be black and black to indicate that the part is changed) 3. The monomer toilet falling water assembly is shaken by hand. If it is shaken, it means that the semi-circular fixing piece at the bottom of the falling water component is broken or loose. If the water in the water tank flows out of the pipe that has entered the water-falling component, it is necessary to check the water inlet assembly! 1. There is an adjusting screw on the water inlet component to adjust the water level. First take a look. 2. If it is not possible, the water stop (or water stop film) in the water inlet assembly may be replaced. Far Infrared Sauna room Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.hottubdesign.com