Feton Corporation , https://www.ultraplantleds.com
NYP high viscosity rotor pump precautions
NYP high viscosity rotor pump (gear pump) Before starting operation, the rotor pump housing filled with liquid to be transported for easy start-up.If the ambient temperature is below the freezing point, should be pre-access to the hot steam pump, the pre- Heat treatment before starting it. NYP high-viscosity rotor pump (gear pump) to the direction of rotation with the inlet and outlet port of the rotor pump if it is the first run, or long-term idle after use, it is best to run at no-load or light load condition Hour or so.If abnormal temperature rise, leakage, vibration and noise are detected in advance during running-in, the machine should be shut down for inspection. NYP High Viscosity Rotor Pump (Gear Pump) is a new type of high-volume positive displacement pump developed according to the needs of petroleum, chemical, grease, dye, paint and foodstuff industries. Because of its wide selection of materials and its unique Some structures, so widely used in different properties, different viscosities of the media delivery. Pumps are mainly inside and outside the rotor, shaft, pump body, the front cover, brackets, seals, bearings and other components. Sealed mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal. Easy to transport materials conveying, in the front cover and the pump body can be designed with a thermal jacket , Work through the steam insulation melt. Look from the spindle extension to the pump clockwise rotation.