Taking the lead in the use of aluminum mold process to create Zhongshan residential standard

From the main downtown area of ​​Zhongshan, drive along Bo'ai Road to the east and you can reach Vanke Park Hyatt Bay in about 10 minutes. You can reach the entrance of Beijing-Zhuhai Expressway less than one kilometer eastward. You can then head north to Guangzhou and South to Zhuhai, and clear the Pearl River Delta. Along the Tsui Hang Express Line, it will continue eastwards, and will be able to reach the core artery of the Pearl River Delta Bay Area, which has already started construction, the Shenzhong Channel. Once completed, it can reach Shenzhen, the world's innovation capital.

The superior location is only an inherent advantage given by Vanke Parker Bay. The garden-style residential landscape design and the near-water human settlement environment all reflect the developers' ingenuity. However, for the owners, traffic and environment are “tables” and construction quality is “inside”. Only “the appearance is the same” can achieve the best living experience.

Vanke, as the world's largest residential supplier, has always been committed to building a safe, comfortable and warm home for its owners, providing the city with stable quality, innovative design, and clean and environmentally-friendly housing. Vanke Park Hyatt recently held the second phase of the second batch of rough open site activities, allowing owners to understand the transparent and real construction information. During the period, the aluminum mold system adopted by Vanke became the focus of attention of the visitors. Through the detailed explanation of the field engineers, the aluminum mold technology with high strength, high precision, few seams and environmental protection has been highly recognized by the owners.

Origins as a pioneer of low-carbon environmental protection in the construction industry

In our traditional impression, the construction site is generally the world of wooden formwork and scaffolding. In the construction site of the Vanke·Park Hyatt Bay Phase II Project, it is the world of aluminum alloy formwork. So why did Vanke take the lead in using aluminum in the industry?

According to the data of Prospective Industry Research Institute's “2013-2017 China Intelligent Building Industry Market Prospects and Investment Strategic Planning Analysis Report”, the total energy consumption in China’s buildings has increased year by year, and the proportion of total energy consumption has been from the last century. The 10% at the end of the 1970s rose to 27.45% and gradually approached 30%. Heating energy consumption per unit of building area is three times that of developed countries, and about 95% of newly-built buildings each year are energy-intensive buildings. It can thus be seen that the increase in the level of low-carbon emission reduction in the construction industry is of great significance to improving the low-carbon level of the entire national economy.

Therefore, as a common and most energy-consuming component of the construction industry, wood mold systems urgently require the replacement of new types of equipment. In 2005, the State promulgated the "Circular on Accelerating the Development of Wood Savings and Replacement Work Opinions" clearly requiring "non-wood materials that can be recycled for use in urban and rural construction are preferred, and the use of non-wood constructions such as aluminum, steel, bamboo formwork and scaffolding should be promoted. equipment".

Therefore, the promotion of aluminum alloy formwork system is a matter that meets energy conservation and environmental protection and benefits the society. “As a resource-integrated enterprise, real estate has the responsibility to promote the transformation of energy-saving and environmentally-friendly construction methods. Vanke, as the world's largest residential supplier, has been committed to promoting the development of the industry in the direction of energy conservation and environmental protection.” Vanke Parker Bay 2 Wen Jiabao, an engineer at the Second Bidding Project Division, said, “Not only is the Bayray Bay project, but Vanke’s other projects in Zhongshan, such as Jinyulanwan and Golden Homeland, have adopted aluminum mold technology, and they have taken the lead in green production trials in the real estate market in Zhongshan. ."

Advantages of good rigidity, high efficiency and reusability

“The quality is good or not, and the customer has the final say.” Vanke's regular site open day activities will show every aspect of building quality to the owners. Vanke's aluminum mold system, with multiple advantages, can better control the quality of the project and deliver a house that will satisfy the customer.

First of all, the aluminum mold is of good rigidity, high precision, less joints, and construction quality is more secure. Compared with traditional wood molds, aluminum molds have better rigidity and higher strength, which can effectively control the wall section size and quality; traditional wood molds require woodworking site cutting board, construction is random, aluminum molds are standardized by the manufacturer according to the drawings Production can ensure that there are few mistakes in the construction of the site, and it also effectively guarantees the quality of the project.

Second, the use of aluminum mold construction and high efficiency, short cycle. According to reports, the aluminum alloy formwork system is simple and convenient to assemble. The average weight is only 27-30 kg/m2. It can be completely assembled by hand. It does not require any assistance from machinery and equipment. Proficient installation workers can install 20-30 per person per day. Square meters. Compared with the traditional wood model, the construction efficiency can be greatly improved, and no skilled workers are required. Only simple training for the construction personnel before installation can be used. In addition, the aluminum mold system is a quick release mold system. A set of normal construction of the template can reach up to four days, which can shorten the construction period and save the management cost of the construction unit.

In addition, aluminum molds can be reused many times, low-carbon and environmentally friendly, and meet the green production requirements. The aluminum alloy construction formwork system adopts integral extrusion into aluminum alloy profiles as raw materials, a set of template specification construction can be reused 300-500 times, and the average use cost is low; and all aluminum mold materials are renewable materials, in line with the national construction Project energy-saving, environmental protection, low-carbon, emission reduction regulations, many developed countries have already stipulated that construction projects are not allowed to use wood formwork, and need to use recycled materials and templates.

In addition, since all parts of the aluminum mold can be reused, there is no garbage on the site after the construction is removed, and the construction environment is safe, clean and tidy; even if the aluminum mold system is scrapped after repeated use, the recycling price per square meter is also 400 yuan. Around, high recovery value and obvious cost-sharing advantages.

New home experience:

In-depth construction of "first-line" owners eat a "assurance pill"

On January 14th, Vanke Park Hyatt Bay opened the second phase of the 2nd semi-finished open site project to allow customers to receive transparent and real construction information, which reflects Vanke's corporate culture of “sunshine system”. The house is the destination of happiness. Being able to look at the process of building your own house ahead of schedule is equivalent to giving the owners a big "centering pill."

In the early morning, the owners successively arrived at the Park Hyatt Bay Sales Department. Under the guidance of Vanke's professional engineers, the customers first entered the delivered community, visited the park's greening, and experienced their own downstairs landscape, park hardware facilities and community cultural atmosphere in the future. .

Afterwards, take the “worksite shuttle” prepared by Vanke to reach the entrance of the construction site. Before entering the construction site, visitors must strictly abide by the rules and regulations of the construction site and queue up from the entrance to receive the helmet. The engineer fully explains it carefully and let the visitors feel the construction of Vanke buildings. safety work.

Next, the owner followed the project engineer to visit the interior of the building. The engineer introduced the quality centralized model display area, the aluminum model display area, the measured experience area, and the tour floor of each process engineering method to allow the customer to systematically understand the engineering quality control of Vanke. Measures.

Among them, the aluminum mold system used by Vanke attracted the attention of visitors. In order to better control the quality of the project, to deliver the house that satisfied the customers, Vanke mainly pushed the aluminum mold construction process. The aluminum alloy formwork has high strength, high precision, and few seams. The construction is convenient and environmentally friendly without relying on traditional carpentry. The application of this system will ensure better quality of the main body of the building.

This on-site experience not only allowed the owners of Vanke Parker Bay to witness the site management and construction work, but also allowed the owners to observe and listen to every project details. Some customers said after the visit, it was an eye-opener and gave a thumbs-up to Vanke's control over the quality of the project.