It is enough to look at these points when purchasing a detachable Container House! Detachable Container House,Prefab Modular House,Prefab Container Homes,Fabricated Container House Henan Jinming Metal Material Co., Ltd. , https://www.jinminghouse.comÂ
When composite material be used in commercial vehicles, it will need to meet specific customer's requirements
with composite appearance, aerodynamics, durability and weight reduction. New process improvements, such as
advanced pre-carbon fiber and alternative resin technologies join in, helping to reduce weight and strength.
The performance of composites:
1. Complex structures such as shaped surface
2. Weight reduction (lightweight)
3. Increased Impact strength
4. Excellent corrosion resistance
5. Easy to assemble with its accessories
Â
Main Products:
Fiberglass(FRP) Hand Lay Up Products,Fiberglass(FRP) Compression Molding Products,Fiberglass(FRP) RTM Products,Fiberglass(FRP) SMC Products,Fiberglass(FRP) BMC products
1st:Mould treatment:Â
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
 gel coat surface.Â
Release agent: This will be brushed on the mould to make ejection easily.
2nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added.Â
Surface mat:  This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface.Â
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the  thickness and strength, we will calculate how many layers of fiberglass mat should be used.
3rd
Solidify:  The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding.Â
Demould:Â After solidified, the product will be demoulded
Cut and trim:Â Â We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions
4th    Adhesion:  Professional mould and  Temperature   and worker
5th   Surface treatment :
6th  Painting
7th  Package Solution:
Our principle: Safe and economical Â
We choose economical packaging on condition that there will be no
damage during transportation.
Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder
company.
8th     Quality Control of working :
Technical document
as following                    Testing  history data
Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
 Yuanjiazhuang community. Covers an area of 11,000 square meters, with registered capital of 10 million yuan.
Specializing in the researching and manufacturing of hand lay-up composite materials (FRP), SMC composite
materials (FRP) BMC composite materials and other products which used in rail transportation,vehicles and other
fields.Our company is a production enterprise integrating R & D, design, manufacture and sales.
We have 10 years experience of FRP complete production process, from moulding to painted end product, and
the quality of our products are well controlled with professional QC engineer. Our products has won the trustÂ
and favor of customers at home and abroad.
·
Mission: Extensive use of composite materials technology to protect our home environment
Â
Â
When composite material be used in commercial vehicles, it will need to meet specific customer's requirements
with composite appearance, aerodynamics, durability and weight reduction. New process improvements, such as
advanced pre-carbon fiber and alternative resin technologies join in, helping to reduce weight and strength.
The performance of composites:
1. Complex structures such as shaped surface
2. Weight reduction (lightweight)
3. Increased Impact strength
4. Excellent corrosion resistance
5. Easy to assemble with its accessories
Â
Main Products:
Fiberglass(FRP) Hand Lay Up Products,Fiberglass(FRP) Compression Molding Products,Fiberglass(FRP) RTM Products,Fiberglass(FRP) SMC Products,Fiberglass(FRP) BMC products
1st:Mould treatment:Â
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
 gel coat surface.Â
Release agent: This will be brushed on the mould to make ejection easily.
2nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added.Â
Surface mat:  This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface.Â
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the  thickness and strength, we will calculate how many layers of fiberglass mat should be used.
3rd
Solidify:  The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding.Â
Demould:Â After solidified, the product will be demoulded
Cut and trim:Â Â We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions
4th    Adhesion:  Professional mould and  Temperature   and worker
5th   Surface treatment :
6th  Painting
7th  Package Solution:
Our principle: Safe and economical Â
We choose economical packaging on condition that there will be no
damage during transportation.
Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder
company.
8th     Quality Control of working :
Technical document
as following                    Testing  history data
Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
 Yuanjiazhuang community. Covers an area of 11,000 square meters, with registered capital of 10 million yuan.
Specializing in the researching and manufacturing of hand lay-up composite materials (FRP), SMC composite
materials (FRP) BMC composite materials and other products which used in rail transportation,vehicles and other
fields.Our company is a production enterprise integrating R & D, design, manufacture and sales.
We have 10 years experience of FRP complete production process, from moulding to painted end product, and
the quality of our products are well controlled with professional QC engineer. Our products has won the trustÂ
and favor of customers at home and abroad.
·
Mission: Extensive use of composite materials technology to protect our home environment
Â
There are still many types of detachable container house on the market, and in addition to being used on daily construction sites, many temporary buildings such as apartments, homestays, offices, schools, dormitories, and camps are also widely used. Its construction is convenient, the investment is low, and it can be used for a long time, and the cost performance is also really good. But there are many similar container houses on the market, how should we choose? In fact, it is enough to look at the following points when purchasing a high-quality container house.
Green is very important
The structure of the container house is simple, and it can also be disassembled. Even if it is only used for a short time, it can be installed again later, which will not cause waste of materials and will not generate construction waste. And you can freely splicing and DIY to create a lot of shapes, which is very good. It is an incomparable advantage of Folding Container House and Flat Pack Container House. When choosing a detachable container house, the roof can be made of solar panel materials, so that It can provide enough electric energy for the interior of the house, and can also achieve a good environmental protection effect.
Ease of use comparison
Compared with traditional concrete buildings, the construction of detachable container houses is really convenient. You only need to determine the specific dimensions and specifications, and then you can install them immediately. Moreover, the panels only need to be assembled in order. If it is a small container house, one or two workers can quickly complete the construction. Moreover, the boards of container houses are easy to transport. Even if the house has been built, it can be disassembled and transported directly in the later stage, and it is very convenient to use in different positions.
Cost-effective comparison
Since it is necessary to purchase a detachable container house, it is still necessary to measure the price. On the one hand, it is necessary to determine the quality of its materials and whether it can meet the standard of long-term use. On the other hand, it is also necessary to measure the price. Generally, manufacturers quote according to the specific size and area of the container house and the material of the color steel plate, so it is still necessary to make a comprehensive comparison, so that it is also very simple to choose a cost-effective container house.
SMC Truck Parts SMC, SMC Auto Parts
Fiber Type: BFRP
Type: Epoxy FRP
Trademark: Lanmon
Transport Package: Wooden Box
Specification: 20Feet 40 feet
Origin: Qingdao
HS Code: 7019909000
Fiber Type: BFRP
Type: Epoxy FRP
Trademark: Lanmon
Transport Package: Wooden Box
Specification: 20Feet 40 feet
Origin: Qingdao
HS Code: 7019909000