At the time of installation, our company has detailed installation drawings, leak prevention measures and technical requirements according to various installation positions and installation procedures for customers to refer to when installing. After the whole machine is installed, first remove the dust and impurities in the water pipe, and connect the drain pipe and the power supply. Do not connect the drain pipe, do not test the machine, otherwise it will cause serious leakage. The location of the installation point should be as far as possible to avoid the place with odor, and it is better to choose a more ventilated and ventilated place. The product should be used correctly under the following conditions: 1, the ambient temperature: 18 ° C -45 ° C; 2. The relative temperature of the environment is ≤85%; 3, atmospheric pressure 86kpa-106kpa; 4, the water supply needs to be softened, the water supply temperature ≤ 45 ° C; water supply pressure: 0.15-0.6Mpa; 5. The voltage deviation does not exceed ±10% of the rated voltage (380v); 6, the use of ambient air quality should meet the GB3096 level 3 (including three) standards; 7. Non-corrosive environment; Sleeve Enhanced Type Expansion Anchor Bolts Stainless Steel Sleeve Enhanced Type Expansion Anchor Bolts, wedge anchors are a type of mechanical concrete anchor for fastening objects to concrete and masonry materials. The concrete wedge expansion anchors are installed into pre-drilled holes using a carbide drill bit. These anchors are expanded in the hole by tightening the nut, and securing the anchor into the base material. Wedge expansion anchors can be installed into concrete & masonry base materials. Sleeve Enhanced Type Expansion Anchor Bolts,Expansion Anchor Bolts,Wedge Anchors,Wedge Expansion Anchors Taizhou Wanluo Hardware Products Co., Ltd. , https://www.wlhardware.com