At present, the LED industry has entered a period of deep integration. With the official implementation of the government's relevant support policies and the growing maturity of LED technology, the future output value of the LED lighting industry will usher in explosive growth. According to the latest silver membership market report of LEDinside, the global energy research institute of TrendForce, the global LED lighting penetration rate is rapidly increasing. In 2014, the output value of LED lighting will reach 17.8 billion US dollars, and the total number of LED lighting products will be 1.32 billion. Only, up 68% from 2013. LEDinside believes that the global LED lighting product replacement tide is caused by the rapid decline in prices, among which the alternative light source products are the most obvious. Bulb lamps and lamps are the most popular alternative light source types, accounting for the 2013 LED lighting products. 38% and 25%. In addition, the future demand for integrated LED lighting product types will gradually rise, especially in combination with smart lighting applications, so it is expected that the proportion of LED lighting products in 2014 will be expected to increase year by year. However, despite the rapid growth of the LED industry, due to the lack of LED technology standards, overcapacity, and vicious competition among enterprises, many LED lighting products have failed to pass the test, and consumers have also talked about the color change of LED lights. Then, what kind of minefields should consumers pay attention to in the specific purchase? Inventory: LED lighting purchase error Misunderstanding 1, the expectation of the actual service life is too high. LED manufacturers expect LED lifetimes to reach 100,000 hours MTBF (mean time between failures, the standard for measuring lamp life used by traditional luminaire manufacturers). However, like all basic light sources, the luminous flux of an LED is also attenuated over time. Therefore, although the LED illumination time can be very long, MTBF is not the only consideration for determining the service life. The attenuation of LED lumens is affected by many environmental conditions such as ambient temperature, humidity and ventilation. Lumen attenuation is also affected by control, thermal management, current levels, and many other electrical design considerations. Many salesmen may give customers some ambiguous information for some reason when selling LEDs, which is misleading. For example, the service life of LEDs is about 100,000 hours, and the 100,000 hours here refers to the life expectancy of LEDs. However, as the light source of illumination, the brightness of the lamp has a process of gradually attenuating and dimming (such as a fluorescent lamp, an energy-saving lamp), and this process is referred to as light decay. Therefore, consumers should pay attention to the speed of light decay when purchasing LEDs, rather than the time of use. Consumers should not expect too much from the actual service life. Misunderstanding 2, the actual luminous angle is taken as an effective angle. The illumination angle of the LED is divided into an effective angle and an actual illumination angle. The angle at which the luminous intensity value is half of the axial strength value and the angle of the luminous axis (normal) are effective angles. The angle of view of the half angle angle (or half power angle) is the actual light angle. Angles other than half of the axial strength are not considered effective angles in practical applications because the light is too weak. Therefore, consumers should pay attention to the actual lighting angle of the product when purchasing products. When calculating the number of products used in the project, the actual lighting angle is the standard, and the effective lighting angle can only be used as a reference value. Misunderstanding three, the higher the power, the higher the brightness. The brightness of an LED is measured by the intensity of the illumination, which is the luminous intensity in the direction of the normal (to the axis of the cylindrical luminous tube), that is, the luminous flux emitted by the unit solid angle, in units of candle light (Candela, cd). Since the luminous intensity of a general LED is small, the luminous intensity is usually measured in millicald (mcd). Generally speaking, the light source emits its luminous flux with different intensity in different directions, and the visible light radiation intensity emitted by the solid angle in a specific direction is called light intensity, which is simply referred to as axial brightness. The concept of electric power is introduced from the amount of work done in equal time. The current is fast and the electric power is large; the current is slow, the electric power is small, or the electric work is more in the same time, the electric power is larger. On the LED, the higher the power, the higher the brightness of the product. Taking Yimei Electronics' three-lamp red LED as an example, when the axial brightness is 1200mcd, the current is 40ma and the power is 0.48W; the three-lamp white LED has the same brightness, the current is 18ma, and the power is only 0.24W; The power of the two lights at the same brightness is different. Therefore, consumers should pay attention to its axial brightness, not power, when purchasing LED lamps.
steel building homes, shop buildings ,metal shop buildings,pre engineered buildings,Zhongda Enterprise
was founded in 2002.and with in 15 years of development, the company has grown
to a multi-functional steel processing base, with total ground area of 100,000㎡ and factory size of 68,000㎡. Zhongda Enterprise is now a leading Steel Structure processing
company in North-East China with full annual production capacity of 40,000
tone. From 2009, according to the market demand, Zhongda entered into a new
field of long-span Steel Structure Bridge, and until 2016, Zhongda had
manufactured over 60,000 tons of steel structured constructions for government
projects, we has more than 400 employees and more than 50 highly qualified
employees with relevant certificates, and was rewarded [Level One Nationalsteel
ConstructionContracting Qualification .Zhongda Enterprise is now became a
international steel structure construction company, with multi-functions of
designing, manufacturing, marketing, and installation, with products including
steel structured factories, shopping malls, bridges,residential buildings,
modular and prefabricated buildings.
Metal Frame House steel building homes,shop buildings,metal shop buildings,pre engineered buildings Zhongda Steel Structure , http://www.zhongdametal.com
